development / bootloader.git / blame
| Commit | Line | Data |
|---|---|---|
| 4d7a4562 JB |
1 | CuBox>> printenv |
| 2 | baudrate=115200 | |
| 3 | loads_echo=0 | |
| 4 | rootpath=/mnt/ARM_FS/ | |
| 5 | netmask=255.255.255.0 | |
| 6 | console=console=ttyS0,115200 useNandHal=single | |
| 7 | mtdids=nand0=dove-nand | |
| 8 | mtdparts=mtdparts=dove-nand:4m(boot),-(rootfs) | |
| 9 | arcNumber=3905 | |
| 10 | CASset=min | |
| 673e84d9 | 11 | ALLOC_len=5 |
| 4d7a4562 JB |
12 | ethprime=egiga0 |
| 13 | bootargs_root=root=/dev/nfs rw | |
| 14 | bootargs_end=:::dove:eth0:none | |
| 15 | image_name=uImage | |
| 16 | bootscript=boot.scr | |
| 673e84d9 | 17 | tftpbootcmd=tftpboot 0x2000000 ${image_name}; setenv bootargs ${console} ${mtdparts} ${bootargs_root} nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}${bootargs_end} usb0Mode=${usb0Mode} usb1Mode=${usb1Mode} video=dovefb:lcd0:${lcd0_params},lcd1:${lcd1_params} clcd.lcd0_enable=${lcd0_enable} clcd.lcd1_enable=${lcd1_enable}; bootm 0x2000000; standalone=fsload 0x2000000 ${image_name};setenv bootargs ${console} ${mtdparts} root=/dev/mtdblock0 rw ip=${ipaddr}:${serverip}${bootargs_end} usb0Mode=${usb0Mode} usb1Mode=${usb1Mode} video=dovefb:lcd0:${lcd0_params},lcd1:${lcd1_params} clcd.lcd0_enable=${lcd0_enable} clcd.lcd1_enable=${lcd1_enable}; bootm 0x2000000; |
| 4d7a4562 | 18 | disaMvPnp=no |
| 673e84d9 | 19 | ethaddr=00:50:43:bb:2f:1f |
| 4d7a4562 JB |
20 | usb0Mode=host |
| 21 | usb1Mode=host | |
| 22 | yuk_ethaddr=00:00:00:EE:51:81 | |
| 23 | lcd0_enable=0 | |
| 24 | lcd1_enable=1 | |
| 25 | lcd0_params=1280x768-24@60 | |
| 26 | lcd1_params=640x480-16@60 | |
| 27 | ethact=egiga0 | |
| 28 | filesize=52DA8 | |
| 29 | ipaddr=192.168.15.223 | |
| 30 | serverip=192.168.15.100 | |
| 31 | stdin=serial | |
| 32 | stdout=serial | |
| 33 | stderr=serial | |
| 34 | passDramInitTag=yes | |
| 35 | mainlineLinux=yes | |
| 36 | enaMonExt=no | |
| 37 | pexMode=RC | |
| 38 | disL2Cache=no | |
| 39 | disL2Ecc=no | |
| 40 | sata_dma_mode=yes | |
| 41 | netbsd_en=no | |
| 42 | vxworks_en=no | |
| 43 | loadaddr=0x02000000 | |
| 44 | mmc_started=0 | |
| 45 | ide_started=0 | |
| 46 | usb_started=0 | |
| 47 | bootcmd=for device_name in usb mmc ide ; do for partition in 0 1; do for directory in / /boot/;do for fstype in ext2 fat; do echo ===> Executing ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript};if itest.s $device_name -eq mmc; then if itest.s $mmc_started -ne 1; then mmcinfo; setenv mmc_started '1';fi;fi;if itest.s $device_name -eq usb; then if itest.s $usb_started -ne 1; then usb start; setenv usb_started '1';fi;fi;if itest.s $device_name -eq ide; then if itest.s $ide_started -ne 1; then ide reset; setenv ide_started '1';fi;fi;if ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;if itest.s $device_name -eq usb; then echo ===> Executing ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript};if ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;fi;done;done;done;done;tftp ${loadaddr} ${bootscript};source ${loadaddr}; | |
| 48 | bootdelay=3 | |
| 49 | enaL2ExtraFeatures=yes | |
| 50 | enaCpuStream=no | |
| 51 | enaVpuPower=no | |
| 52 | enaGpuPower=yes | |
| 53 | ||
| 54 | Environment size: 2602/65532 bytes |