| 1 | README for wpa_supplicant |
| 2 | |
| 3 | |
| 4 | REQUIREMENTS |
| 5 | |
| 6 | Kernel driver for your wireless card, e.g. ndiswrapper or ipw2100. |
| 7 | See the wpa_supplicant homepage for supported drivers. |
| 8 | |
| 9 | |
| 10 | PRE-INSTALL |
| 11 | |
| 12 | |
| 13 | POST-INSTALL |
| 14 | |
| 15 | 1. Create a network setup for wpa_supplicant: |
| 16 | |
| 17 | wpa_passphrase <ssid> <your_secret> >> /etc/wpa.conf |
| 18 | |
| 19 | See the sample configuration file wpa_supplicant.conf in the |
| 20 | sources for a complete description of the available options |
| 21 | for wpa_supplicant. |
| 22 | |
| 23 | 2. Change your wlan start script to use wpa_supplicant. |
| 24 | |
| 25 | Following an example for the centrino ipw2100 driver, no need |
| 26 | to do anything with iwconfig: |
| 27 | |
| 28 | /sbin/modprobe ipw2100 |
| 29 | /sbin/ifconfig eth1 xxx.xxx.xxx.xxx netmask 255.255.255.xxx |
| 30 | /sbin/route add default gw xxx.xxx.xxx.xxx |
| 31 | /usr/sbin/wpa_supplicant -B -Dwext -ieth1 -c/etc/wpa.conf |
| 32 | |
| 33 | Note: the above configuration makes use of the generic wext |
| 34 | wpa_supplicant driver (Linux wireless extensions), |
| 35 | which is the preferred nowadays. Use this driver for |
| 36 | ndiswrapper as well. |
| 37 | |
| 38 | |
| 39 | PRECAUTION |
| 40 | |
| 41 | As off version 0.6.8 the -w option of wpa_supplicant was removed. |
| 42 | See the ChangeLog for more infos. This may cause troubles because |
| 43 | using the -w option was the recommend way to start wpa_supplicant |
| 44 | until version 0.6. |