devices/cubox/printenv.info

   1 CuBox>> printenv
   2 baudrate=115200
   3 loads_echo=0
   4 rootpath=/mnt/ARM_FS/
   5 netmask=255.255.255.0
   6 console=console=ttyS0,115200 useNandHal=single
   7 mtdids=nand0=dove-nand
   8 mtdparts=mtdparts=dove-nand:4m(boot),-(rootfs)
   9 arcNumber=3905
  10 CASset=min
  11 ALLOC_len=5
  12 ethprime=egiga0
  13 bootargs_root=root=/dev/nfs rw
  14 bootargs_end=:::dove:eth0:none
  15 image_name=uImage
  16 bootscript=boot.scr
  17 tftpbootcmd=tftpboot 0x2000000 ${image_name}; setenv bootargs ${console} ${mtdparts} ${bootargs_root} nfsroot=${serverip}:${rootpath}  ip=${ipaddr}:${serverip}${bootargs_end} usb0Mode=${usb0Mode} usb1Mode=${usb1Mode}  video=dovefb:lcd0:${lcd0_params},lcd1:${lcd1_params} clcd.lcd0_enable=${lcd0_enable} clcd.lcd1_enable=${lcd1_enable};  bootm 0x2000000; standalone=fsload 0x2000000 ${image_name};setenv bootargs ${console} ${mtdparts} root=/dev/mtdblock0 rw ip=${ipaddr}:${serverip}${bootargs_end} usb0Mode=${usb0Mode} usb1Mode=${usb1Mode} video=dovefb:lcd0:${lcd0_params},lcd1:${lcd1_params} clcd.lcd0_enable=${lcd0_enable} clcd.lcd1_enable=${lcd1_enable}; bootm 0x2000000;
  18 disaMvPnp=no
  19 ethaddr=00:50:43:bb:2f:1f
  20 usb0Mode=host
  21 usb1Mode=host
  22 yuk_ethaddr=00:00:00:EE:51:81
  23 lcd0_enable=0
  24 lcd1_enable=1
  25 lcd0_params=1280x768-24@60
  26 lcd1_params=640x480-16@60
  27 ethact=egiga0
  28 filesize=52DA8
  29 ipaddr=192.168.15.223
  30 serverip=192.168.15.100
  31 stdin=serial
  32 stdout=serial
  33 stderr=serial
  34 passDramInitTag=yes
  35 mainlineLinux=yes
  36 enaMonExt=no
  37 pexMode=RC
  38 disL2Cache=no
  39 disL2Ecc=no
  40 sata_dma_mode=yes
  41 netbsd_en=no
  42 vxworks_en=no
  43 loadaddr=0x02000000
  44 mmc_started=0
  45 ide_started=0
  46 usb_started=0
  47 bootcmd=for device_name in usb mmc ide ; do for partition in 0 1; do for directory  in / /boot/;do for fstype in ext2 fat; do echo ===> Executing ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript};if itest.s $device_name -eq mmc; then if itest.s $mmc_started -ne 1; then mmcinfo;   setenv mmc_started '1';fi;fi;if itest.s $device_name -eq usb; then if itest.s $usb_started -ne 1; then usb start; setenv usb_started '1';fi;fi;if itest.s $device_name -eq ide; then if itest.s $ide_started -ne 1; then ide reset; setenv ide_started '1';fi;fi;if ${fstype}load ${device_name} 0:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;if itest.s $device_name -eq usb; then echo ===> Executing ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript};if ${fstype}load ${device_name} 1:${partition} ${loadaddr} ${directory}${bootscript}; then source ${loadaddr};fi;fi;done;done;done;done;tftp ${loadaddr} ${bootscript};source ${loadaddr};
  48 bootdelay=3
  49 enaL2ExtraFeatures=yes
  50 enaCpuStream=no
  51 enaVpuPower=no
  52 enaGpuPower=yes
  53
  54 Environment size: 2602/65532 bytes